Paver sealing Company in Cape Coral; Restoring & Protecting Paver
Few things you want to keep in mind before sealing your pavers or having them sealed.
*You always to make sure they cleaned first with a pressure washer.
*After pavers are cleaned you want to take chlorine and mix it 50% with water in a pump sprayer and begin soaking pavers that were cleaned till its puddled up on pavers! this will make sure all mold, algae, weeds & ants etc. are dead! Then rise with water after 20mins!
*Following a nice rise, it’s now time to begin re-sanding. using play sand start pouring your bag of sand zigzag down pavers then us broom to sweep sand in cracks of pavers! Once all paver cracks are fill sweep off excess.
*Once all excess sand is removed you want to wet entire paver area using only shower or mist option to spray water. after doing this you will see sand sink back in down cracks. at this point you may have to add more sand in places and repeat. after all sand in cracks are filled you want to rise off pavers for a final rise leaving a 1/8 inch of sand in cracks below paver level.
*Finally grab you pump spray, cut brush, paint brush tray and begin cutting out wall’s corners by screens etc. whatever you be working around you don’t want paver sealer on. After cutting everything out your now ready to spray the sealer. begin to spray whole area working on. should go down white and dry with that beautiful wet look.
and like us on Facebook @ Ahcm.fl
Call or Text us day or night for any questions (239) 205-0177
